Rebar Couplers

Product Details:

Rebar couplers are used in reinforced concrete constructions to swap normal rebar lap joints. The couplers are also appropriate for use in reinforced concrete slabs, walls, columns etc. Each coupler contains of a piece of rebar end done with a thread and coupler sleeve at the right end as viewed in the direction of installation. In concrete construction joints, this rebar couplers can be used to replace all pieces of rebar going through the formwork.

Parallel Rebar coupler are designed and manufactured in compliance with all required standards. designed for the connection of concrete reinforcing bars of diameter range from 16mm to 40mm.

Rebar couplers are used in reinforced concrete structures to replace normal rebar lap joints. The couplers are also suitable for use in reinforced concrete columns and walls. Each rebar coupler consists of a piece of rebar equipped with a thread and coupler sleeve at the right end as viewed in the direction of installation. In construction joints, rebar couplers can be used to replace all pieces of rebar going through the formwork.

Sizes :- 1/2 inch, 3 inch, 1 inch, 3/4 inch, 2 inch

It is aThreaded connection steel rebar coupler which guaranty an ultimate tensile strength of the joint (Splice) slightly greater than that of the parent bar. Each of the connection constitutes, one sleeve that connects two bars, the ends of these which are threaded using machines.

Standard Sizes: Rebar Coupler

• 16 mm Rebar Coupler
• 20 mm Rebar Coupler
• 25 mm Rebar Coupler
• 32 mm Rebar Coupler
• 40 mm Rebar Coupler

Additional Information:

• Item Code: TRPRC1
• Production Capacity: 20000
• Delivery Time: In 1 Or 2 Days
• Packaging Details: Standard Packing

Product Details:

The reinforcement coupler is used as the main reinforcement of heavy-duty element and castin-situ structures as a replacement for a normal lap joint. The coupler has been designed for the tensile resistance of rebar. A structure designed with traditional reinforcement can be changed to utilise a reinforcement coupler of the same bar size on site. The coupler serves as a replacement solution for lap-jointed main reinforcements of slabs, beams and columns.

Rebar couplers are used in reinforced concrete structures to replace normal rebar lap joints. The couplers are also suitable for use in reinforced concrete columns and walls. Each rebar coupler consists of a piece of rebar equipped with a thread and coupler sleeve at the right end as viewed in the direction of installation. In construction joints, rebar couplers can be used to replace all pieces of rebar going through the formwork.
Rebar couplers are used for joining rebars with full tension capacity. The ends of bars to be joined are provided with threads, and the bars are joined using a coupler sleeve that transfers the force on the rebar across the connection.

Additional Information:

• Item Code: TRPRC3
• Production Capacity: 500000
• Delivery Time: Within 2 Days
• Packaging Details: Packed In Gunny Bags

Product Details:

Rebar couplers are used in reinforced concrete structures to replace normal rebar lap joints. The couplers are also suitable for use in reinforced concrete columns and walls. Each rebar coupler consists of a piece of rebar equipped with a thread and coupler sleeve at the right end as viewed in the direction of installation. In construction joints, rebar couplers can be used to replace all pieces of rebar going through the formwork.
 Rebar couplers are used for joining rebars with full tension capacity. The ends of bars to be joined are provided with threads, and the bars are joined using a coupler sleeve that transfers the force on the rebar across the connection.
Rebar couplers are used for joining rebars with full tension capacity. The ends of bars to be joined are provided with threads, and the bars are joined using a coupler sleeve that transfers the force on the rebar across the connection.

The reinforcement coupler is used as the main reinforcement of heavy-duty element and castin-situ structures as a replacement for a normal lap joint. The coupler has been designed forthe tensile resistance of rebar. A structure designed with traditional reinforcement can bechanged to utilise a reinforcement coupler of the same bar size on site. The coupler serves asa replacement solution for lap-jointed main reinforcements of slabs, beams and columns. 

Additional Information:

• Item Code: TRPRC5
• Production Capacity: 500000
• Delivery Time: Within 2 Days
• Packaging Details: Packed in Gunny Bag

Product Details:

Rebar couplers are used in reinforced concrete structures to replace normal rebar lap joints. The couplers are also suitable for use in reinforced concrete columns and walls. Each rebar coupler consists of a piece of rebar equipped with a thread and coupler sleeve at the right end as viewed in the direction of installation. In construction joints, rebar couplers can be used to replace all pieces of rebar going through the formwork.
Rebar couplers are used for joining rebars with full tension capacity. The ends of bars to be joined are provided with threads, and the bars are joined using a coupler sleeve that transfers the force on the rebar across the connection.

Rebar couplers are used for joining rebars with full tension capacity. The ends of bars to be joined are provided with threads, and the bars are joined using a coupler sleeve that transfers the force on the rebar across the connection.

The reinforcement coupler is used as the main reinforcement of heavy-duty element and castin-situ structures as a replacement for a normal lap joint. The coupler has been designed for the tensile resistance of rebar. A structure designed with traditional reinforcement can bechanged to utilise a reinforcement coupler of the same bar size on site. The coupler serves as a replacement solution for lap-jointed main reinforcements of slabs, beams and columns. 

Additional Information:

• Item Code: TRPRC7
• Production Capacity: 500000
• Delivery Time: Within 2 Days
• Packaging Details: Packed In Gunny Bag

Product Details:

Rebar couplers are used for joining rebars with full tension capacity. The ends of bars to be joined are provided with threads, and the bars are joined using a coupler sleeve that transfers the force on the rebar across the connection.
The reinforcement coupler is used as the main reinforcement of heavy-duty element and castin-situ structures as a replacement for a normal lap joint. The coupler has been designed forthe tensile resistance of rebar. A structure designed with traditional reinforcement can bechanged to utilise a reinforcement coupler of the same bar size on site. The coupler serves asa replacement solution for lap-jointed main reinforcements of slabs, beams and columns. 
Rebar couplers are used for joining rebars with full tension capacity. The ends of bars to be joined are provided with threads, and the bars are joined using a coupler sleeve that transfers the force on the rebar across the connection.

Additional Information:

• Item Code: TRPRC2
• Delivery Time: Within 2 Days
• Packaging Details: Packed In Gunny Bags

Product Details:

MBT couplers require neither bar end preparation to make threads nor bar rotation to effect installation. The bars are supported within the coupler by two serrated saddles.As a series of lockshear bolts are tightened to a predetermined torque, they're embedded into the bar. At an equivalent time the saddles bite into both the bar and therefore the shell of the coupler. Installation is complete when the heads of all of the bolts are sheared off. The lockshear bolts on sizes 10mm to 20mm are often tightened employing a ratchet wrench. For larger sizes a nut runner is suggested . Impact tools must not be used. MBT couplers are often wont to join imperial, plain round or deformed reinforcing bars.

Additional Information:

• Item Code: TRPMBTC3
• Production Capacity: 50000
• Delivery Time: Within 2 Days
• Packaging Details: Packed In Gunny Bag

Product Details:

Rebar couplers are used for joining rebars with full tension capacity. The ends of bars to be joined are provided with threads, and the bars are joined using a coupler sleeve that transfers the force on the rebar across the connection.
The reinforcement coupler is used as the main reinforcement of heavy-duty element and castin-situ structures as a replacement for a normal lap joint. The coupler has been designed forthe tensile resistance of rebar. A structure designed with traditional reinforcement can bechanged to utilise a reinforcement coupler of the same bar size on site. The coupler serves asa replacement solution for lap-jointed main reinforcements of slabs, beams and columns.

Rebar couplers are used in reinforced concrete structures to replace normal rebar lap joints. The couplers are also suitable for use in reinforced concrete columns and walls. Each rebar coupler consists of a piece of rebar equipped with a thread and coupler sleeve at the right end as viewed in the direction of installation. In construction joints, rebar couplers can be used to replace all pieces of rebar going through the formwork.
Rebar couplers are used for joining rebars with full tension capacity. The ends of bars to be joined are provided with threads, and the bars are joined using a coupler sleeve that transfers the force on the rebar across the connection.

Additional Information:

• Item Code: TRPRC6
• Production Capacity: 500000
• Delivery Time: Within 2 Days
• Packaging Details: Packed In Gunny Bag

Product Details:

MBT couplers require neither bar end preparation to make threads nor bar rotation to effect installation. The bars are supported within the coupler by two serrated saddles.As a series of lockshear bolts are tightened to a predetermined torque, they're embedded into the bar. At an equivalent time the saddles bite into both the bar and therefore the shell of the coupler. Installation is complete when the heads of all of the bolts are sheared off. The lockshear bolts on sizes 10mm to 20mm are often tightened employing a ratchet wrench. For larger sizes a nut runner is suggested . Impact tools must not be used. MBT couplers are often wont to join imperial, plain round or deformed reinforcing bars.

Additional Information:

• Item Code: TRPMBTC4
• Production Capacity: 50000
• Delivery Time: Within 2 Days
• Packaging Details: Packed In Gunny Bag

Product Details:

Exclusive Rebar Coupler Manufacturers and Installers of a wide range of HIGH PERFORMANCE JOINTS SPECIALIZED CONSTRUCTION RELATED Machine amp Accessories MECHANICAL SPLICING REBAR SPLICING SOLUTION Manufactured in Technical Collaboration with various World BRANDS

Product Details:

Exclusive Rebar Coupler Manufacturers and Installers of a wide range of HIGH PERFORMANCE JOINTS SPECIALIZED CONSTRUCTION RELATED Machine amp Accessories MECHANICAL SPLICING REBAR SPLICING SOLUTION Manufactured in Technical Collaboration with various World BRANDS

Product Details:

Exclusive Rebar Coupler Manufacturers and Installers of a wide range of HIGH PERFORMANCE JOINTS SPECIALIZED CONSTRUCTION RELATED Machine amp Accessories MECHANICAL SPLICING REBAR SPLICING SOLUTION Manufactured in Technical Collaboration with various World BRANDS

Product Details:

Premium quality 32mm BIS-certified rebar coupler for heavy-duty construction applications. Manufactured from high-tensile carbon steel with hot-dip galvanized coating, this mechanical coupler provides full-strength reinforcement splicing without welding or overlapping. Perfect for critical structural applications where strength and reliability are paramount.

Key Features:

• ✅ BIS Certified (IS 16172)

• ✅ Hot-dip galvanized corrosion protection

• ✅ Full tensile strength retention (125%+)

• ✅ Heavy-duty construction for 32mm rebars

• ✅ Seismic-resistant design

• ✅ Easy torque installation (450-550 Nm)

Technical Specifications:

• Rebar Size: 32mm

• Material: Grade 8.8 High-Tensile Steel

• Coating: Hot-dip galvanized (IS 4759)

• Thread Type: Metric parallel

• Tensile Strength: ≥125% rebar yield strength

• Weight: Approximately 0.85 kg per coupler

Product Details:

The 16mm ISI Marked Rebar Coupler is a BIS-certified mechanical splicing system designed to replace traditional lap joints for 16mm diameter TMT rebars. Manufactured from high-tensile carbon steel and hot-dip galvanized for corrosion resistance, it ensures full-strength, seismic-safe connections without welding or overlapping. Ideal for modern RCC construction, it saves time, reduces rebar waste, and complies with Indian standards for structural safety.

✅ Key Features

• BIS Certification: Marked under IS 16172 for quality assurance

• Material: High-strength carbon steel (Grade 8.8)

• Finish: Hot-dip galvanized for rust prevention

• Installation: Simple torque-based tightening (300–400 Nm)

• Compatibility: Works with Fe-500/550 TMT rebars

• Reusability: Can be reused with threaded rebars

��️ Applications

• High-rise buildings

• Bridges & flyovers

• Industrial structures

• Seismic-resistant construction

• �� Pricing & Packaging

  • MOQ: 100 Pieces

  • Packaging: Corrugated box (50 pcs/box)

  • GST: 18% Extra

  • Delivery: 5-7 days across India

Product Details:

BIS-certified 25mm rebar coupler for mechanical splicing of TMT bars. Hot-dip galvanized carbon steel construction provides full-strength, weld-free connections. Saves reinforcement, reduces construction time, and ensures seismic-resistant joints. Ideal for high-rise buildings, bridges, and industrial projects.

Key Features:

• ✅ BIS Certified (IS 16172)

• ✅ Hot-dip galvanized finish

• ✅ Full tensile strength retention

• ✅ Easy torque installation

• ✅ Reusable and corrosion resistant

Technical Specifications:

• Rebar Size: 25mm

• Material: Grade 8.8 Carbon Steel

• Thread Type: Metric parallel

• Tensile Strength: ≥125% rebar yield strength

• Installation Torque: 400-500 Nm

Packing & Pricing:

• MOQ: 100 Pieces

• Packaging: 50 pcs/box

• GST: 18% Extra

• Delivery: Pan-India 5-7 days

Product Details:

The 20mm ISI Marked Rebar Coupler is a BIS-certified mechanical splicing solution designed for 20mm diameter TMT rebars. Manufactured from high-tensile carbon steel with hot-dip galvanized finish, it ensures full-strength, seismic-resistant connections without welding or overlapping. Ideal for modern RCC construction, it saves reinforcement, reduces labor time, and complies with Indian structural safety standards.

✅ Key Features

• BIS Certification: Marked under IS 16172

• Material: High-strength carbon steel (Grade 8.8)

• Finish: Hot-dip galvanized for corrosion resistance

• Installation: Easy torque-based tightening (350–450 Nm)

• Compatibility: Fe-500/550 TMT rebars

• Reusability: Suitable for reuse with threaded bars

��️ Applications

• High-rise buildings

• Bridges & flyovers

• Industrial structures

• Seismic zone construction

• �� Pricing & Packaging

  • MOQ: 100 Pieces

  • Packaging: 50 pcs/box

  • GST: 18% Extra

  • Delivery: Pan-India within 5-7 days